Star Micronics MG-S Series, Руководство по эксплуатации, Страница: 91 / 114

MG-S series operation manual 8 Controlling and adjustment functions
－
81
－
8-5-2 (1) Administrator password registration
(1)
(2) Make sure not to forget the administrator password.
In case that the administrator password is lost, please contact the store where you purchased
the product.
(1)
(2) Only one password can be set for administrator.
The initial administrator password is “0000”.
1
Select the Administrator password registration.
Push [Menu] key, then push [F1-F4]
keys to go to <643 SET ADMIN
PASS>.
Push [F4] key to input the password.
2
Input the password to register.
Numeric value input
(Refer to “2-5-3 Numeric value input”)
Input to set the password.
Four digits of 0-9 can be selected.
Push [F4] key to fix.
3
Exit the setting menu.
Push [Menu] key to shift to the
measuring mode.
8-5-2 (2) User password registration
Administrator can register the user password for each user(operator).
(1) Refer to “Appendix 6 Balance operation with password control function” for setting each user’s
authority.
(2) User password can be set only for User 1 and User 2.
(3) The initial user password is “0000”.
1
Select the User password registration.
Push [Menu] key, then push [F1-F4]
keys to go to <644 SET USER
PASS>.
Push [F4] key to input the password.
2
Input the password to register.
Numeric value input
(Refer to “2-5-3 Numeric value input”)
Input to set the password.
Four digits of 0-9 can be selected.
Push [F4] key to fix.
3
Exit the setting menu.
Push [Menu] key to shift to the
measuring mode.