Star Micronics MG-S Series Скачать руководство пользователя страница 60

Страница: 60 / 114

Functions related to the performance MG-S series operation manual

－

4-3

Response speed

The larger numeric value is set in this setting menu, the more stable the balance indication becomes in
unstable conditions.

Select the response speed.

Push [Menu] key, then push [F1-F4] keys
to go to <22 RESPONSE>.

Push [F4] key to change the setting value.

Push [F1/F2] key to select.

Refer to Set List.

Push [F4] key to fix.

Set list

Senstive mode

Fast

Medium fast

Medium

Medium slow

Slow

Exit the setting menu.

Push [Menu] key to shift to the measuring
mode.

4-4

Zero tracking

Setting to the zero tracking function makes it possible to automatically correct the zero-point fluctuation
caused by the temperature fluctuation, etc. when “0” is indicated, through which the “0” indication is
maintained.

For verified balance, <23 ZERO TRAC 1, 2, 4> are not available.

Select the zero tracking.

Push [Menu] key, then push [F1-F4] keys
to go to <23 ZERO TRAC>.

Push [F4] key to change the setting
value.

Push [F1/F2] key to select.

Refer to Set List.

Push [F4] key to fix.

Set list

OFF

Invalid

0.5

: 0.5d

: 1.0d

: 2.0d

: 4.0d

Exit the setting menu.

Push [Menu] key to shift to the measuring
mode.

Содержание MG-S Series



















































































































Результаты поиска

Содержание MG-S Series

Отзывы:

Star Micronics MG-S Series, Руководство по эксплуатации, Страница: 60 / 114

Результаты поиска

Содержание MG-S Series

Отзывы: