Star Micronics MG-S Series Скачать руководство пользователя страница 59

Страница: 59 / 114

MG-S series operation manual 4

Functions related to the performance

－

Functions related to the performance

Set the balance indication stability and response speed.

4-1

Hierarchy of functions related to the performance

For verified balance, gray shaded items (

) are not indicated.

★

: Initial setting value in a verified balance

4-2

Stability discrimination width

When the larger numeric value is set in this setting menu, the laxer stability judgement is applied and
the balance indicate “Stable mark” < > in more unstable conditions.

For verified balance, <21 STABLE 2, 4> are not available.

Select the stability discrimination width .

Push [Menu] key, then push [F1-F4] keys
to go to <21 STABLE>.

Push [F4] key to change the setting value.

Push [F1/F2] key to select.

0.5 : 0.5d

1 :  1.0d
2 :  2.0d
4 :  4.0d

Push [F4] key to fix.

Exit the setting menu.

Push [Menu] key to shift to the measuring
mode.

Содержание MG-S Series



















































































































Результаты поиска

Содержание MG-S Series

Отзывы:

Star Micronics MG-S Series, Руководство по эксплуатации, Страница: 59 / 114

Результаты поиска

Содержание MG-S Series

Отзывы: