Star Micronics MG-S Series, Руководство по эксплуатации, Страница: 51 / 114

MG-S series operation manual 3 Functions related to the operation
－
41
－
3-10-2 Comparator function setting
For the setting of the reference value and upper and lower limit values, refer to “5 User
information setting”.
1
Select the comparator function.
Push [Menu] key, then push [F1-F4] keys to
go to <131 ACTIVATE>
Push [F4] key to change the setting value.
Push [F1/F2] key to select.
OFF : OFF
H / L : Upper and lower limits valid
HIGH : Upper limit alone valid
LOW : Lower limit alone valid
Push [F4] key to fix.
2
Select the discriminant condition.
Push [F1-F4] keys to go to
<132 CONDITION>
Push [F4] key to change the setting value.
Push [F1/F2] key to select.
FULL : At all times
STBL : Only at stable times
Push [F4] key to fix.
3
Select the discriminant range.
Push [F1-F4] keys to go to
<133 RANGE>
Push [F4] key to change the setting value.
Push [F1/F2] key to select.
5 : +5 d or more
50 : +50 d or more
FULL : Entire area
Push [F4] key to fix.
4
Select the discriminant method.
Push [F1-F4] keys to go to
<134 METHOD>
Push [F4] key to change the setting value.
Push [F1/F2] key to select.
ABSOL : Absolution value method
RELAT : Relative value method
Push [F4] key to fix.