Star Micronics MG-S Series Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 114

Star Micronics MG-S Series Скачать руководство пользователя страница 3

－

i

－

Preface

Thank you very much for having purchased our Tuning-Fork high precision electronic balance MG-S
series.
This document describes how to operate the product.

Instructions

●

The copyright of this document belongs to Star Micronics. Reprinting or duplicating of all or part
of this document without notice shall not be allowed.

●

Please note that product improvement or modification may cause partial discrepancy between
the product and the description of this document.

●

The description of this document is subject to change without notice.

●

This document has been created carefully. In case that, however, any error or imperfection is
found by any chance, please let us know.

●

Documents of which pages are missing or irregularly bound will be exchanged. Please inform
the store where you purchased the product.

●

Trouble related to the product or system will be dealt with in accordance with the individual
maintenance contract. Please note, however, that we will not take responsibility for
consequential trouble such as discontinuation of operation caused by the product trouble.

●

is the registered trademark of Star Micronics. Company names and product

names appearing in this document are the trademarks or registered trademarks of the

respective company concerned.

●

The

Bluetooth

® word mark and logos are registered trademarks owned by the

Bluetooth SIG, Inc. and any use of such marks by Star Micronics is under license. Other
trademarks and trade names are those of their respective owners.

●

Microsoft, Windows are either trademarks or registered trademarks of Microsoft Corporation in
the Unites States and/or other countries.

«
1
2
3
4
5
...
»

Содержание MG-S Series



















































































































Отзывы:

Нет отзывов