Star Micronics MG-S Series Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 114

Star Micronics MG-S Series Скачать руководство пользователя страница 20

1

Prior to use MG-S series operation manual

－

10

－

1-6

Description of the operation keys

1-6-1

Basic

No

Key

Name of key

Performance

1

[On/Off]

Turns on and off the power for the balance.
On: Push the key, Off: Push the key long

2

[Menu]

Used for calling/exiting the setting menu.
Used for canceling the setting value selection and going back to the
measurering mode.

3

[Output]

Use for data outputting.
Use for data importing in the Statistics/Formulation mode.

4

[Tare]

Use for tare subtraction.

5

[Zero]

Use for zero-point adjustment.

6

[F1]

([F] key)

<
<

>
>

:
:

Use for selecting the mode, function and item.

Use for moving up to the menu/item selections, or use for
incrementing the numeric values.

7

[F2]

([F] key)

<
<

>
>

:
:

Use for selecting the mode, function and item.

Use for moving down to the menu/item selections, or use
for decrementing the numeric value.

8

[F3]

([F] key)

<
<

>
>

:
:

Use for selecting the mode, function and item.
Use for moving to the upper menu layer, or use for

selecting the digit to change.

9

[F4]

([F] key)

<
<

<

>
>

>

:
:

:

Use for selecting the mode, function and item.
Use for moving to the lower menu layer, or use for

selecting the digit to change.

Use for entering/executing the selected
menu/item/value, or use for returning to the setting

menu/measuring mode.

The [F] keys on which < >, < >, < >, < >, < > or < > are displayed above are
valid.
Shortcuts for various modes/functions can be assigned to [F] keys. Please refer to
“8-2 Shortcut setting for accessing various measuring modes” and “8-3 Free key setting”.

These keys are called [F]
keys or [F1]-[F4] key in
this manual as a matter of
convenience, while there
are not such indications
around them.

«
...
18
19
20
21
22
...
»

Содержание MG-S Series



















































































































Отзывы:

Нет отзывов