IFBD-HW03/04 Product Specifications Rev. 0.00
3.3.6.3. Updating Firmware Using FTP
This uploads binary data for upgrades in bin format to the “flash” directory (port) with a binary mode
by logging in to the product using FTP.
•
The firmware cannot be updated using FTP when starting up in the flash memory load
mode when the power is turned on, by setting the DIP switches.
•
The “flash" port is viewable by all users.
•
Firmware update is only possible by logging in with the root or maker user.
•
When uploading or after it is completed, this checks whether transmission was correct by
calculating the sum value of the firmware data on the FTP side. If transmission was not
normal on the firmware, the update of the firmware is cancelled.
•
When the update is normally on FTP, the product will self-reboot.
3.3.6.4. Example of the Procedures for Updating the Firmware of the Product Using FTP
The following describes an example of the procedures for F/W update of the product using FTP.
// PC side environment //
- OS:
Windows 2000 or XP
- File storage location:
"C:¥IFBD-HW_FW_1.0.2"
IFBD-HW03/04 F/W binary data
"IFBD-HW03_04.bin"
is in the folder.
- FTP client software
Startup the standard Windows FTP command from the command prompt.
// IFBD-HW03/04 side environment //
- TCP/IP address: 192.168.222.21
- Root permission password: “”
* A password is unnecessary for default settings.
3-14
