– 3 –
1 . Cutter Cover / Front Panel / Rear Cover
Required jigs and tools: Electric screwdriver (Driver bit 2)
(1) Turn off the printer and unplug it from the electri-
cal outlet.
(2) Front Panel
1
Bend the front panel slightly towards you to easily
remove section A.
(3) Removal
•
Cutter cover
2
•
Two screws
3
[ Tightening torque : 0.8±0.2 N.m]
•
Rear cover
4
2 . Main Logic Board
Required jigs and tools: Electric screwdriver (Driver bit 2)
(1) Turn off the printer and unplug it from the electri-
cal outlet.
(2) Remove the rear cover to the procedure described in
item 1.
(3) Removal
•
Four screws
1
[ Tightening torque : 0.8±0.2 N.m]
•
Board cover unit
2
•
Two screws
3
[ Tightening torque : 0.8±0.2 N.m]
•
Sub-shassis
4
•
Ten connectors
5
•
Head cable
6
•
Four screws
7
[ Tightening torque : 0.8±0.2 N.m]
•
Main logic board
8
1
6
1
1
2
5
5
1
4
8
3
3
7
7
7
7
2
4
3
1
A
A
