Star Micronics ASR10, Техническое руководство

Страница: 23 / 28

– 21 –
1-2 . Parts List
Printer Assembly
DRWG.NO. REV. PARTS NO. PARTS NAME Q'TY REMARKS RANK
1 37647060 CPU MODULE UNIT ASR 1 S
2 30781960 BULK ADAPTER PS60A-24B1L 1 S
3 30085390 MODEL NAME SEAL ASR 1 S
4 30071600 BRAND SEAL ASR 1 S
5 09990452 LCD YXM070TLW06 1 S
6 04991298 FASTENER T40I 2
7
*1
00930803 SCREW TAT 3-8 PT 2
#1 00930809 SCREW TAT 3-8 BT 2 S
8 00820304 SCREW TR 2-3 2 S
9 02010401 HEXAGON NUT NH4-1 4 S
10 01604100 SCREW TR 4-10 4 S
11 37648100 MECHANISM UNIT ASR 1
12 37648000 LCD UNIT ASR 1 S
13 37647020 LED BOARD UNIT ASR 2 S
14 37647000 MAIN LOGIC BD UNIT ASR 1 S
15 37645200 COVER LOCK UNIT ASR 1
16 37645100 LCD BASE UNIT ASR 1
17 37640110 CASE UNIT ASR 1 S
18 37640030 REAR COVER UNIT ASR 1 S
19 37640021 FRONT COVER UNIT ASR 1 S
19-1 37981350 PLATEN UNIT S-P BSC1 1 S
19-2 30211050 PF ROLLER BEARING TMP6 1
19-3 04020016 STOP RING SE4.0 1 S
20 37640010 BOARD COVER UNIT ASR 1
21 33904050 LENS ASR 1
22 33902100 SWIVEL BASE ASR 1
23 33023110 SWIVEL COVER ASR 1 S
24 33023100 TILT COVER ASR 1 S
25 33023060 CUTTER COVER ASR 1 S
26 33023050 INNER COVER ASR 1
27 33011030 FRONT PANEL ASR 1 S
28 32010950 SUB-CHASSIS ASR 1
29 32010930 BOARD CHASSIS ASR 1
30 30991770 PROTECT RUBBER ASR 6
31 04991902 MINI CORD CLAMP ES-6U 2
32 *1 04991204 FASTENER T18S 1
33 01903130 SCREW TR 3-20 FL 4 S
34 01903101 SCREW TAT 3-6 CT-FL 4 S
35 01903031 SCREW TR 3-6 FL 2 S
36 00930609 SCREW TAT 3-6 CT 18 S
37 00630504 SCREW TR 3-5 6 S
38 33914800 ROLL PAPER GUIDE T65II 1 S
39 33010010 BASE STAND ASR 1 S
40 30991230 RUBBER FOOT 12X12 TSP7 8 S
41 30722180 FLAT CABLE 40X100 ASR 1 S
42 #1 39590800 CUTTER COVER UNIT MB ASR 1 OPTION:MSR & BCR O
#1 39590810 CUTTER COVER UNIT M ASR 1 OPTION:MSR only O
#1 39590820 CUTTER COVER UNIT B ASR 1 OPTION:BCR only O
NOTE1: Parts of the shaded area can not be ordered.
2: The Platen and the PF Roller Bearing(DRWG.No.19-2) are included with the Platen Unit S-P BSC1 (DRWG.
No.19-1).The Platen, the PF Roller Bearing and the Stop Ring (DRWG.No.19-3) should be replaced at the
same time.When replace the Platen, must be use the new Stop Ring.
For the installation position of the Platen , refer to item 10 of page 10.