– 10 –
9 . Case Unit
Required jigs and tools: Electric screwdriver (Driver bit 2)
(1) Turn off the printer and unplug it from the electri-
cal outlet.
(2) Remove the inner cover, lens and the fLED PCBs to the
procedure described in item 8.
(3) Removal
•
Four screws
1
[ Tightening torque : 0.8±0.2 N.m]
•
Case unit
2
10 . Platen Unit
Required jigs and tools: E-ring holder 4.0
E-ring dispenser 4.0
(1) Turn off the printer and unplug it from the electrical
outlet.
(2) Open the front panel to the procedure described in item 1.
(3) Open the front cover unit to the procedure described in
item 7.
(4) Removal
•
Stop ring
1
•
PF roller bearing
2
•
Platen unit
3
Note: When assembling, be sure to always use a new
stop ring. Never reuse one.
1
2
3
1
1
1
1
2
