Star Fans FS7-40, Быстрый старт

Страница: 1 / 10

Thanks for selecting our product.
Please read the user’s manual carefully before use for safety and product reliability.
Please keep this information handy for reference.
Please pay special attention to the wording with this marking.
FS7-40
1
READ AND SAVE THESE INSTRUCTIONS
● Unplug the fan before maintenance . Do not touch the fan if your hands are wet .
● Do not connect the fan to main power supply or fit the adjusting screw before assembly of the fan blade and the
guards .
● Do not connect to main power supply or switch on the fan before assembly is completed .
● Those who are not qualified electricians should not disassemble , repair or rebuild the fan .
● Unplug the fan when it is not being used .
● Do not unplug the fan by holding the cable cord . Unplug by holding the flexible connector .
● Do not use the fan if the cord or plug has been damaged , or if the power socket is loose .
● Do not make repairs when there is damage to the cord . Do not load the fan with dual cord or bin the cord .
● Do not use the fan near any of the following circumstances : gas stove or any fire source , unusually humid or high
temperature, oil soot with a lot of metal powder, or unstable places not good for oscillation.
● Do not insert your hand into the guards or the moving parts .
● To reduce the risk of fire or electric shock , do not use this fan with any solid - state speed control device .
● Place the fan on a smooth and level surface .
● Do not operate any fan with a damaged cord or plug . Discard fan or return to an authorized service facility for
examination and/or repair.
● Do not run the cord under the carpet . Do not cover cord with throw rugs , runners , or similar coverings . Do not
route the cord under furniture or appliances. Arrange the cord away from traffic area and where it will not be
tripped over.
IMPORTANT SAFETY INSTRUCTIONS
USER SERVICING INSTRUCTIONS
For products that employ plug with replaceable fuse, please send for qualified electric technician to replace the fuse
in case of replacement required.
Step 1 . Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on the cord.
Step 2 . Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades.
Step 3 . Remove fuse carefully. Push the fuse from the other side or turn fuse holder over to remove fuse.
Step 4 . Risk of fire. Replace fuse only with 5Amp, 125 Volt fuse (provide with product).
Step 5 . Close fuse cover. Slide closed the fuse access cover on top of attachment plug.