Star Cooperation 3-01000A01-01, Инструкция по эксплуатации, Страница: 5 / 18

Created by STAR ELECTRONICS GmbH & Co. KG
Date created 2020-11-04 Date modified 2020-11-04 Page 5 of 18
3
7
-0
0
1
-T
0
8
_I
nst
ru
ct
io
n_
fo
r_
U
se
_D
1
V
9
-F
1 General
1.1 Intended use
The FlexMedia 1000BASE-T1 is solely used to convert “100BASE-TX” into “100BASE-T1” or “1000BASE-TX”
into “1000BASE-T1” and vice versa.
Only the herein described accessory parts are allowed to be used together with the FlexMedia 1000BASE-
T1.
The FlexMedia 1000BASE-T1 is designed, intended, and authorized only for laboratory applications use.
Any other use without the prior written consent of
STAR COOPERATION prohibited.
The FlexMedia 1000BASE-T1 is NOT designed, intended, or authorized for
 use as part of medical systems,
 life support applications,
 aviation, space, nuclear, or military applications,
 use in areas where combustible or explosive gas mixtures are likely to occur,
 other applications in which a mistake or malfunction may result in death, personal injury or
severe physical damage.
The product described in this document is an industrial device, i.e. is designed, intended, or authorized for
professional use. It is not designed, intended, or authorized for home applications or consumers. For this
reason, use by non-professionals is forbidden.
1.2 Used Pictograms
The meaning of used pictograms is shortly described below.
Follow the specific instructions in the document where these pictograms are placed.
NOTICE
Used to indicate a situation which may result in an operating failure.
Damage of the product may occur, but there is no hazard of injury
if not avoided.
Information
Used to indicate information provided only for purposes of clarification, illustration, and
general information.
Reference
References to other documents.
Product marking which shows the compliance of the product with the European Waste
Electrical and Electronic Equipment Directive 2012/19/EU.
1.3 Safety and Handling Instructions
Please read the instructions for use carefully. To protect the device or the application against damage, or
to avoid personal injury the FlexMedia 1000BASE-T1 has to be handled as described herein.
Changes or modifications of the FlexMedia 1000BASE-T1 are not allowed for safety and warranty reasons!
STAR COOPERATION i s not liable for any damages arising from non-observance of the product information.