Created by
STAR ELECTRONICS GmbH & Co. KG
Date created
2020-11-04
Date modified 2020-11-04
Page 12 of 18
3
7
-0
0
1
-T
0
8
_I
nst
ru
ct
io
n_
fo
r_
U
se
_D
1
V
9
-F
4
Getting Started
4.1
Assembly and Line-up
Read and follow these instructions when connecting and using the FlexMedia 1000BASE-T1:
NOTICE
Ensure that all signal lines connected to the FlexMedia 1000BASE-T1 are in the
allowed range.
Be sure to connect all cables as described in this manual.
Never insert anything metallic into the openings of the FlexMedia 1000BASE-T1.
Ensure to grasp the plug and not the cable when disconnecting the FlexMedia
1000BASE-T1.
4.2
Configuration and Operation
Use the power connector of the FlexMedia 1000BASE-T1 to connect with a power-supply within the correct
voltage range.
Connect the 1000BASE-T1 and Ethernet (1000BASE-Tx) with their networks. Check the pinouts.
Adjust the Master/Slave-DIP-switch and the Bitrate-DIP-switch if necessary.
Check the state of the LEDs.
Содержание 3-01000A01-01
Страница 1: ...FlexMedia 1000BASE T1 Instructions for Use...