HOW TO ASSEMBLE YOUR
WIND SCULPTURES
CWS-01 -02 -03 -01L -02L
COPYRIGHT © STANWOOD IMPORTS & ORIENTAL TOUCH LLC
STEP 1.
Gather these parts: one pole with beveled
edge and three support stakes.
STEP 2.
Hammer the
main pole into
the ground
using a Rubber
Mallet until the
black line
touches the
ground (about 1
ft. deep).
Installation: Pole Anchoring
* We recommend you use blue Loctite thread locker if in windy area
1
STEP 3.
Slide a support
stake into the
main pole
and hammer it
into the ground.
STEP 4.
Slide a second
support stake
into the main
pole. Position it
~120 degrees
away from the
first stake and
hammer it into
the ground.
STEP 5.
Slide a third
support stake on
to the main pole.
Position it evenly
away from the first
two stakes and
hammer it into the
ground.
STEP 6.