manualshive.com logo in svg

Stanley QB Expert, Инструкция по эксплуатации


Поделиться
Скачать
background image

QB Expert Alpha Controller

112

Special Application Tools

d60°C as the limit for thermal rise over ambient of a contactable surface (e.g. if the ambient is 25°C, the 
surface limit is 85°C.) Since the default limit is 85°C inside the tool regardless of ambient, no external surface can 
exceed this value no matter what the ambient temperature. 
STANLEY allows the temperature limit adjustment to provide flexibility to the professional user. Once a customer 
changes the setting from the factory default, it is their responsibility to ensure the safety of the user.
Controller parameter settings can have a significant effect on tool operating temperatures.

5.2.10 Setting Torque, Angle, and Other Operating Parameter

WARNING

EXCESSIVE TORQUE CONDITION
To Avoid Injury:

•  Only trained and qualified personnel should program controllers. 
•  Never set control limits above the maximum rating of the tool. 
•  Setting control limits above the maximum rating of the tool can cause high reaction torque. 
•  Always test for proper tool operation after programming via the controller. 

CAUTION

•  Ensure fastener and/or system will withstand the level of torque generated by the tool. Excessive torque may 

cause breakage and possible personal injury.

The Alpha controller can be setup to change tightening Jobs or Tasks from the tool’s MFB. 

5.2.11 Assembly (Forward) Operation

Prepare to resist the tool’s torque reaction.
Keep the tool pointed straight at (perpendicular to) the fastener. Start the tool by depressing the start trigger 
switch.  The tool stops after reaching torque.
Release start trigger switch after the cycle is complete.

5.2.12 Disassembly (Reverse) Operation

Prepare to resist the tool’s torque reaction which will be the opposite of the assembly reaction.
Start the tool by depressing the start lever or trigger.  The tool is not running inside of a strategy so it will not 
stop on its own.
Release start lever after sufficient time or rotation to stop the tool.

5.3  Special Application Tools

5.3.1  Exposed Gear Socket Tools

Содержание QB Expert























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для QB Expert

Farris Engineering 2600 Series General Installation And Maintenance Instructions preview
2600 Series
Бренд: Farris Engineering Страницы: 12
Eastern Times Technology BT-100 Quick Start Manual preview
BT-100
Бренд: Eastern Times Technology Страницы: 4
Vacon 10 Quick Manual preview
10
Бренд: Vacon Страницы: 18
Samson 580 Translation Of The Original Operating Instruction preview
580
Бренд: Samson Страницы: 36
FBII XL-2T Hookup And Installation Instructions preview
XL-2T
Бренд: FBII Страницы: 71
CAME Z Series Connection Manual preview
Z Series
Бренд: CAME Страницы: 4
BADODOSECURITY G200 Quick Manual preview
G200
Бренд: BADODOSECURITY Страницы: 8
eclisse E-MOTION Installation, Operation And Maintenance Manual preview
E-MOTION
Бренд: eclisse Страницы: 40
H3C WX Series Configuration Manual preview
WX Series
Бренд: H3C Страницы: 69
Haldex PR Installation Manual preview
PR
Бренд: Haldex Страницы: 8
Harsco Industrial ENVI Advanced User'S Manual preview
ENVI
Бренд: Harsco Industrial Страницы: 57
WAM LBC Series Assembly And Main Instructions For Use And Maintenance preview
LBC Series
Бренд: WAM Страницы: 62
walimex WR-100 Instruction Manual preview
WR-100
Бренд: walimex Страницы: 7
Walchem WebMaster Manual preview
WebMaster
Бренд: Walchem Страницы: 2
Walchem WebMaster Quick Start Manual preview
WebMaster
Бренд: Walchem Страницы: 73
Walchem W900 Series Instruction Manual preview
W900 Series
Бренд: Walchem Страницы: 126
wallas 3008 Quick Start Manual preview
3008
Бренд: wallas Страницы: 2
Keba Kemro K2 Project Engineering Manual preview
Kemro K2
Бренд: Keba Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды