8 ► PBD
1201 User Manual
Set the Trigger Lock
BEFORE
inserting or removing dies from
the Crimping Head.
OPERATION
CHARGE BATTERY
Battery Charging
Battery Charged
Hot/Cold Delay
1.
Set the trigger lock.
2. Insert battery.
3.
Insert the die into the crimping head.
4. Insert the cable ends into the die.
5.
Release the trigger lock. Press and
hold the trigger until the die is crimped.
Press and hold the pressure release to
open the crimping head.
Note: Release the trigger to immediately
stop the tool. Press the pressure release
at any time to open the jaws.
USING THE PBD1201
1
2
3
5
4
Pressure
Release
