background image

PRODUCTS COVERED BY THIS WARRANTY:

 

LENGTH OF WARRANTY:*  

(FROM THE DATE OF ORIGINAL RETAIL PURCHASE)

 

  

NONCOMMERCIAL/  

NONRENTAL

 

COMMERCIAL

 

RENTAL

 

Engine  

24 months  

6 months  

3 months  

Wands, hoses, detergent bottles, quick connects, accessories 

3 months 

3 months 

3 months 

Emission Controls  

24 months 

24 months 

24 months 

Pump 

12 months 

6 months 

6 months 

*LENGTH OF WARRANTY:   All warranty coverage except emission controls expires when the product exceeds 24 months. 

TO QUALIFY FOR THIS WARRANTY: 

 

The product must be purchased in the United States from a dealer authorized  by GXi Outdoor Power, LLC  to sell those products. This warranty applies to first retail purchaser / owner 
during the applicable warranty time period. SAVE YOUR PROOF OF PURCHASE RECEIPT.   

 

WHAT GXi OUTDOOR POWER LLC WILL REPAIR OR REPLACE UNDER WARRANTY: 

 

GXi Outdoor Power, LLC  will repair or replace, at its option, any part that is proven to be 

defective in material or workmanship 

under normal use during the applicable warranty 

time period subject to the exclusions stated herein.  This warranty is void if the owner fails to follow the prescribed maintenance and operating procedures described in this manual.  
This specifically refers to ensuring routine oil changes are made, that fuel stabilizer is used for long-term storage.  Dirty carburetors, spark plugs, air filters, fuel filters, wands, hoses, 
detergent injectors and bottles, garden quick connects, kinked hoses, accessories, and freight or handling damage are not covered under warranty. 
 
GXi has the right to recover warranty administration costs from the owner if the root cause of the malfunction was found to be other than defective material or workmanship.  In 
particular, this warranty does not cover: contaminants in the fuel or oil; damage caused by not following the prescribed warnings and operating practices; failure to follow proper 
maintenance and storage procedures; and physical damage due to shipping or handling or storage.  Warranty repairs will be made without charge for parts and labor for the first 
year.  After the first year, this limited warranty covers the costs of replacement parts only.  

 

 

Anything replaced under warranty becomes the property of GXi.  Parts replaced under warranty will be considered as part of the original product and any warranty on those parts will 
expire coincident with the original product warranty.  

TO OBTAIN WARRANTY SERVICE: 

 

You must take the STANLEY Power Equipment product, accessory, replacement part, apparel or the power equipment on which the accessory or replacement part is installed, and 
proof of purchase, at your expense, to any GXi’s service location in the United States, who is authorized to service that product, during the service location’s normal business hours. If 
you are unable to obtain warranty service, or are dissatisfied with the warranty service you receive, take the following steps: first, contact the manager of the service center involved; 
normally this will resolve the problem. However, if you should require further assistance, write or call the GXi Customer Service.  

EXCLUSIONS: 

 

THIS WARRANTY DOES NOT EXTEND TO PARTS AFFECTED OR DAMAGED BY ACCIDENT AND/OR COLLISION, NORMAL WEAR, FUEL CONTAMINATION, USE IN AN APPLICATION 
FOR WHICH THE PRODUCT WAS NOT DESIGNED OR ANY OTHER MISUSE, NEGLECT, INCORPORATION OR USE OF UNSUITABLE ATTACHMENTS OR PARTS, UNAUTHORIZED AL-
TERATION, OR ANY CAUSES OTHER THAN DEFECTS IN MATERIAL OR WORKMANSHIP OF THE PRODUCT. Consumable parts such as oil, spark plugs, filters, carburetors, are not 
covered by this warranty.  

DISCLAIMER OF CONSEQUENTIAL DAMAGE AND LIMITATION OF IMPLIED WARRANTIES: 

 

STANLEY DISCLAIMS ANY RESPONSIBILITY FOR LOSS OF TIME OR USE OF THE PRODUCT, TRANSPORTATION, COMMERCIAL LOSS, OR ANY OTHER INCIDENTAL OR CONSEQUEN-
TIAL DAMAGE. ANY IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WRITTEN LIMITED WARRANTY.  
This warranty is void if the manufacturing date and the serial number on the equipment has been removed or the equipment has been modified.  

 

EMISSION CONTROL SYSTEM INFORMATION 

The U.S. and California Clean Air Acts  
EPA and California regulations require all manufacturers to furnish written instructions describing the operation and maintenance of emission control systems. The following instruc-
tions and procedures must be followed in order to keep the emissions from your GXi engine within the emission standards. Maintenance, replacement, or repair of the emission 
control devices and systems may be performed by any engine repair establishment or individual, using parts that are ‘‘certified’’ to EPA standards. 
The emission control systems on your STANLEY engine were designed, built, and certified to conform with EPA regulations. We recommend the use of genuine GXi parts whenever 
you have maintenance done. These original-design replacement parts are manufactured to the same standards as the original parts, so you can be confident of their performance. The 
use of replacement parts that are not of the original design and quality may impair the effectiveness of your emission control system.  A manufacturer of an aftermarket part assumes 
the responsibility that the part will not adversely affect emission performance. The manufacturer or re-builder of the part must certify that use of the part will not result in a failure of 
the engine to comply with emission regulations. 
Emission controls are covered by this warranty for all uses for a period of 2 years from original retail purchase date, this coverage extends to subsequent owners of the product with 
proof of original purchase. For emissions warranty service call 1-800-393-0668 or e-mail [email protected] .  

LIMITED WARRANTY

 

Содержание P2350S




















Отзывы: