background image

17 of 18 

® 

STANLEY    Electric Pressure Washers 

 

Rev: Dec2010 

TIPS FOR CLEANING

 

CAUTION 



Before cleaning any surface, an inconspicuous area should be cleaned to test spray pattern and distance for maximum cleaning results. 



If painted surfaces are peeling or chipping, use extreme caution as pressure washer may remove the loose paint from the surface. 



When using on surfaces which might come in contact with food, flush surfaces with plenty of drinking water.

 

Decks 

Pre-rinse deck and surrounding area with fresh water. If using 
detergent, apply to surface at low pressure. For best results, limit your 
work area to smaller sections of approximately 25 square feet. Allow 
detergent to remain on surface 1-3 minutes.  Do not allow detergent to 
dry on surface. Rinse at high pressure in a long sweeping motion 
keeping the spray nozzle approximately 18-24 inches from the cleaning 
surface. Always clean from top to bottom and from left to right. When 
moving on to a new section of the cleaning surface, be sure to overlap 
the previous section to eliminate stop marks and ensure a more even 
cleaning result. 

 

House Siding 

(Pre-rinse cleaning surface with fresh water. If using detergent, apply to 
surface at low pressure (for best results, limit your work area to  
sections of approximately 6 feet and always apply detergent from 
bottom to top). Allow detergent to remain on surface 1-3 minutes. Do 
not allow detergent to dry on surface, if surface appears to be drying, 
simply wet down surface with fresh water. Rinse at high pressure from 
top to bottom in an even sweeping motion keeping the spray nozzle 
approximately 18-24 inches from the cleaning surface. 

 

Patio and Lawn Furniture 

Pre-rinse furniture and surrounding area with fresh water. If using 
detergent, apply to surface at low pressure. Allow detergent to remain 
on surface 1-3 minutes. Do not allow detergent to dry on surface. Rinse 
at high pressure in a sweeping motion keeping the spray nozzle 
approximately  18-24 inches from the cleaning surface. For best results, 
clean from top to bottom and from left to right. 

Automobiles, RV’s, Boats, Motorcycles, ATV’s 

Pre-rinse vehicle with fresh water. If using detergent, apply to surface at 
low pressure. For best results, clean one side of vehicle at a time and 
always apply detergent from bottom to top, do not allow detergent to 
dry on surface. If needed, use special wash brush attachment (not 
included) to remove stubborn dirt. Rinse at high pressure in a sweeping 
motion keeping the spray nozzle approximately 18-24 inches from the 
cleaning surface (distance should increase when rinsing pin-striping or 
other sensitive surfaces).  Always clean from top to bottom and from left 
to right. For best results, wipe surface dry with a chamois or soft dry 
cloth. 

 

BBQ Grills, Gardening Tools, Mowers/Trimmers 

Pre-rinse cleaning surface with fresh water. If using detergent or 
Degreaser, apply detergent at low pressure. Allow detergent to remain 
on surface 1-3 minutes. Do not allow detergent to dry on surface. Rinse 
at high pressure keeping the spray nozzle approximately 18-24 inches 
from the cleaning surface. For removing extremely stubborn dirt, it may 
be necessary to move the spray nozzle even closer to the surface for 
greater dirt cutting action. 

 

Driveway, Sidewalks, Patios, Brick 

Pre-rinse cleaning surface with fresh water. If using detergent or 
Degreaser, apply to surface at low pressure. For best results, limit your 
work area to smaller sections of approximately 25 square feet. Allow 
detergent or degreaser to remain on surface 1-3 minutes. Do not allow 
detergent to dry on surface. Rinse at high pressure in a sweeping 
motion keeping the spray nozzle approximately 18-24 inches from the 
cleaning surface.  Always clean from top to bottom and from left to 
right.  
 
 

Содержание P2350S




















Отзывы: