Standart HX290U, Руководство по обслуживанию

Страница: 12 / 40

11
3. DISASSEMBLY
Note : Be sure to switch off the transceiver's power before
disassembling it. And then remove an antenna and
a battery pack.
3.1 Removing the Diecast frame
(a) Remove the single screw
A
to remove the Mic/Spk
jack cover.
(b) Remove the single nut
B
, and remove the power/volume
and channel knobs.
(c) Remove the two screws
C
.
Figure 3-1
Power/volume knob
Channel knob
B
Antenna ring
A
Mic/Spk
jack cover
C
(d) Pull the diecast frame up from front case in the
direction indicated by arrow
q
, and remove the it in
the direction indicated by arrow
w
.
Figure 3-2
Diecast
frame
Front case
2
1