Installation Instruction
Temporary Work Light
150 W LED Temporary High Bay
Read the installation instructions and all product labels before proceeding with the installation. This product must
be installed in full accordance with applicable electrical and building codes.
SAFETY WARNINGS
• To reduce the risk of fire and electrical shock, do not exceed the maximum wattage, including any additional
string loads.
• Suitable for use in damp locations.
• Do not submerse.
• Four units maximum can be daisy chained.
• Do not connect or disconnect when wet.
• Do not open – no user serviceable inside.
• This device is not intended for use with emergency exit fixtures or emergency exit lights.
• Operating Temperature: -30°C / -22°F to 40°C / 104°F
• 5 year limited warranty.
PRODUCT SPECIFICATIONS
Voltage
120 V
Wattage
150 W
Light Output
15 000 lm
Power cord length
20 ft (6.1 m)
Wire
18 AWG
CRI
80
Amperage
1.3 A
IP Rating
IP54
TO PREVENT ELECTRICAL SHOCK, POWER SHOULD BE TURNED OFF FROM THE ELECTRICAL PANEL BEFORE INSTALLATION
OR MAINTENANCE.
