GX2360S
Page 60
9.3 PA/FOG OPERATION
When the RAM+ is connected to the
QUANTUM
it is capable of controlling the
30W Public address, 4 fog horns, bells, and whistles.
9.3.1 Operating the PA / Hailer
1. Press and hold the [
NAV
] key then select PA with the [
] or
[
] key.
2. Press the [
CALL/SET
] key.
3. Press the
PTT
switch and speak into the microphone.
4. To turn up the PA Volume, press the
PTT
switch and press
the [
] or [
] keys to adjust the Audio output level. The
level can be set from 0 to 30W.
5. To adjust the listen back volume, (while in listenback mode)
press the [
VOL
] Key, then press the [
] or [
] key to the
desired listen back volume.
To exit from the PA Hailer mode, press the [
CALL/SET
], [
16/9
],
or [
WX
] key.
9.3.2 Operating the FOG Horn
The
QUANTUM
is capable of sending 4 pre-programmed fog signals and also
Horn, Siren, Aground and Anchor signals.
FOG 1: POWER BOAT UNDERWAY
FOG 2: POWER BOAT STOPPED
FOG 3: SAIL BOAT, FISH VESSEL, TOW VESSEL
FOG 4: VESSEL UNDER TOW
1. Press and hold the [
NAV
] key then select FOG with the [
]
or [
] key.
2. Press the [
CALL/SET
] key.
3. Select the one of the eight functions described above with
the [
] or [
] key and press the [
CALL/SET
] key.
4. On the “
Horn
” and “
Siren
” modes, press the
PTT
switch to
activate the tone through the HAIL/PA speaker.
Press the [
] or [
] keys to adjust the Audio output level.
The level can be set from 0 to 30W.
5. To adjust the listen back volume, (while in listenback mode)
press the [
VOL
] Key, then press the [
] or [
] key to the
desired listen back volume.
To exit from the FOG or other signaling mode, press the [
16/9
],
[
WX
], or [
CALL/SET
] key.
