(6)
0.5 to 1 mm
Sheet Presence Microswitch
Feed Tray
Actuator
Clutch Stopper
Sheet Feed Clutch Solenoid
Clutch Lever
2 to 4 mm
5. Troubleshooting
A. PF-P320 Does Not Work with Start Button or Test Feed Button
(Cause 1)
Feed clutch solenoid is not
positioned properly.
(Remedy 1)
Adjust the position of feed clutch solenoid so that the
clearance between clutch lever and clutch stopper is 0.5
to 1 mm (0.02" to 0.04") while feed clutch solenoid is
on.
NOTE
- Fix feed clutch solenoid so that feed clutch solenoid
will not hit clutch lever.
(Cause 2)
Sheet presence microswitch on
the top of feed tray is broken,
sheet sensor microswitch is not
positioned properly, or connec-
tor is not connected properly.
(Remedy 2)
- Check or replace sheet presence microswitch from the
square opening on the bottom of frame.
- Position microswitch so that actuator ON position where
click sound is heard is 2 to 4 mm (0.08" to 0.16") above
feed tray.
(Cause 3)
Start/Stop button is broken.
(Remedy 3)
Replace switch or whole P.C. Board.
