Standard Horizon HX890, Руководство пользователя

Страница: 84 / 116

82
4. Repeat step 2 and 3 until the name is complete. The name can consist of
up to 15 characters, if you do not use all 15 characters, select “→” to move
to the next space.
This method can also be used to enter a blank space in the name.
If a mistake was made entering the channel name, press the [ CH ▼]/[ CH▲ ]/
[◄]/[
►
] key to select “←” or “→”, press the [
SELECT
] soft key until the
wrong character is selected, then perform steps 2 and 3.
5. Press the [ FINISH ] soft key to save the name.
6. To enter the name of another channel, repeat the steps 1 through 5.
7. Press the [ CLR ] key to return to radio operation.
NOTE
When “ CHANNEL NAME ” is assigned to a soft key, the channel name
input may be displayed directly by pressing the [
NAME
] soft key during
radio operation.
14.10 NOISE CANCELLATION
Independently enables/disables the Noise-canceling function of the transmitter
and the receiver.
Press and hold
key

CH SETUP

SELECT

NOISE CANCEL

SELECT
( / key) ( key) ( / key) ( key)
1. Select “ TX MODE ” with the [ CH ▼]/[ CH▲ ]
key, then press the [ SELECT ] soft key.
TX MODE
BACK
CH SETUP
RX MODE
SELECT
NOISE CANCEL
OFF
OFF
OFF
BACK
CH SETUP
ON
ENTER
TX MODE
OFF
BACK
CH SETUP
LEVEL1
LEVEL2
LEVEL3
LEVEL4
ENTER
RX MODE
2. Press the [
CH
▼]/[
CH▲
] key to select “
ON
”
or “ OFF ”, then press the [ ENTER ] soft key.
3. Select “ RX MODE ” with the [ CH ▼]/[ CH▲ ]
key, then press the [ SELECT ] soft key.
4. Select the noise cancelling level from
“
LEVEL 1
” through “
LEVEL 4
” or “
OFF
”
with the [ CH ▼]/[ CH▲ ] key, then press the
[
ENTER
] soft key.
5. Press the [ CLR ] key to return to radio opera-
tion.