Standard Horizon HX890, Руководство пользователя

Страница: 80 / 116

78
13.8 SOFT KEYS
Use this menu to make soft key assignments and to set how long the display
will show the soft key icon after a soft key is pressed.
13.8.1 Key Assignment
Press and hold
key

CONFIGURATION

SELECT

SOFT KEY

SELECT
( / key) ( key)
( / key)
( key)
1. Select “ KEY ASSIGNMENT ” with the
[ CH ▼]/[ CH▲ ] key, then press the [ SELECT ]
soft key.
KEY ASSIGNMENT
BACK
CONFIGURATION
KEY TIMER
SELECT
SOFT KEY
1:WX/CH
BACK
CONFIGURATION
2:DUAL WATCH
3:FM RADIO
4:TX PWR
5:MOB
SELECT
KEY ASSIGNMENT
NONE
BACK
CONFIGURATION
TX PWR
WX/CH
SCAN
DUAL WATCH
ENTER
KEY SELECTION
2. Press the [ CH ▼]/[ CH▲ ] key to select the
key number to be programmed, and press
the [ SELECT ] soft key.
3. Press the [ CH ▼]/[ CH▲ ] key to select a new
function to be assigned to the soft key, and
press the [ ENTER ] soft key. Available func-
tions are listed below. By selecting “ NONE ”
the soft key assignment is removed.
4. Repeat steps 2 and 3 to program other soft
keys. Choose from the 18 functions that may
be assigned.
5. Press the [ CLR ] key to return to radio operation.
DISPLAY FUNCTION
SOFT KEY NUMBERS
ASSIGNED AS DEFAULT
NONE
–
TX/PWR Changes transmit power.
4
WX/CH Switches channels between weather and marine.
1 (HX890)
SCAN Turns scanning function ON or OFF.
7
DUAL WATCH Turns dual or triple watch scan function ON or OFF.
2
WPT MARK Marks the current position for a “Waypoint”. 12
COMPASS Enables the “Compass” display.
WAYPOINT Enables the Waypoint Navigation. 8
MOB Marks the position where a person falls overboard.
5
SCAN MEMORY Add or remove channels from memory channel scan.
6
PRESET Programs or deletes the preset memory channel.
1 (HX890E)
STROBE Turns the strobe light LED ON or OFF.
10
CH NAME Edit channel names.
LOGGER Starts and stops logging position data. 11
NOISE CANCEL Enables the noise canceling settings display. 9
FM RADIO Starts the FM Broadcast radio receiver. 3
BACKLIT Enables the Display Mode.