Standard Horizon HX890 Скачать руководство пользователя страница 27

Страница: 27 / 116

When an alert is received on a NOAA weather

channel, scanning will stop and the transceiver

will emit a loud beep to alert the user of a NOAA

broadcast. Press any key to stop the alert.

After stopping the beep sound, the weather

alert reception confirmation screen will appear.

Press [

] to display a confirmation screen.

The confirmation screen will ask you whether

to move to the weather channel or return in the

marine channel. Press [

YES

] to switch to the

weather channel, and press [

] to return to

the marine channel.
To disable the weather alert function, refer to

section “

14.2 WEATHER ALERT (HX890 USA

version only)

”.

162.525MHz

TIME

LON

LAT

118

09.5822

37.1200

LOC 09:56:56

163.275MHz

!Warning!

Radio received

Weather Alert!

Press any key

163.275MHz

!Warning!

Radio received

Weather Alert!

163.275MHz

!Warning!

Do you want to

change the CH?

YES

163.275MHz

TIME

LON

LAT

118

09.5822

37.1200

LOC 09:56:56

NOTE

If no key is pressed the alert will sound for 5 minutes and then the

weather report will be received.

8.7.2 NOAA Weather Alert Testing (USA version only)

NOAA tests the alert system ever Wednesday between 11AM and 1PM. To test

the

HX890

’s NOAA weather feature, setup as in section

8.7.1 NOAA Weather

Alert (USA version only)

and confirm the alert is heard on Wednesdays

between 11AM and 1PM local time.

8.8 MULTI WATCH (TO PRIORITY CHANNEL)

Multi watch is used to scan two or three channels for communications.



In Dual Watch, a normal VHF channel and the priority channel are scanned

alternately.



In Triple Watch, a normal VHF channel, the priority channel, and the sub

channel are scanned alternately.

When a signal is received on the normal channel the radio briefly switches

between the normal channel and the priority channel to look for a transmission.

If the radio receives communications on the priority channel the radio stops

and listens to priority channel until communication ends and then starts dual

or triple watch scan again.

Содержание HX890





















































































































Результаты поиска

Содержание HX890

Отзывы:

Похожие инструкции для HX890

Бренды по названию

Популярные бренды

Standard Horizon HX890, Руководство пользователя

Результаты поиска

Содержание HX890

Отзывы:

Похожие инструкции для HX890

Бренды по названию

Популярные бренды