Standard Horizon HX380, Руководство пользователя

Страница: 21 / 44

Page 21 HX380
“ USA ” B
And
“ I
nternAtIonAl
” B
And
“ C
AnAdIAn
” B
And
4. If using Low power is not effective, select High power (5 watts: “ ” icon
disappears) by pressing the key.
5. When receiving a signal, wait until the incoming signal stops before trans-
mitting. The transceiver cannot transmit and receive simultaneously.
6. Press and hold the
PTT
(Push-To-Talk:
) switch to
transmit. During transmission, the “ ” indicator will
appear on the display.
7. Position your mouth 1 inch (2.5 cm) away from the mic
hole. Speak slowly and clearly into the microphone.
8. When the transmission is finished, release the PTT ( ) switch.
6.3.1 TRANSMIT TIME - OUT TIMER
(
TOT
)
While the PTT ( ) switch is held down, transmission time is limited to 5 min-
utes. This prevents prolonged (unintentional) transmissions. About 10 seconds
before automatic transmitter shutdown, a warning beep will sound from the
speaker. The transceiver automatically switches to the receiving mode, even
if the
PTT ( ) switch is held down. Before transmitting again, the PTT ( )
switch must first be released. This Time-Out-Timer (TOT) prevents a continu -
ous transmission that would result from an accidentally stuck PTT ( ) switch.
NOTE
The PTT ( ) switch is disabled for 10 seconds after the transceiver auto-
matically switches to the receiving mode by the TOT feature.
6.4 USA, CANADIAN, AND INTERNATIONAL CHANNELS
1. To change from US to Canadian or International Marine Channels, hold
down the key and press the key. The band will change from USA,
to Canadian, and to International with each press.
2. “ U ” appears on the LCD for the USA band, “ C ” appears for the Canadian
band, and “ I ” appears for the International band.
3. Refer to the marine channel charts in section “ 9 VHF MARINE CHANNEL
ASSIGNMENTS ” for allocated channels.