Page 15
HX380
4.3.3 BATTERY CHARGING
1. Turn the transceiver off.
2. Insert the DC plug from the
SAD-11B
or
SAD-18B
into the DC jack on the
CD-
48
side panel, then plug the
SAD-11B
or
SAD-18B
into the AC line outlet.
3. Insert the
HX380
(with the battery pack)
into the
CD-48
; the antenna should be
at the left side when viewing the char-
ger from the front.
4. If the
HX380
is inserted correctly, the
Red “
CHARGING
” indicator will glow.
A fully-discharged pack will be charged
completely in approximately 7 hours.
5. When charging is completed, the red
LED indicator will change to green. Remove the transceiver from the
CD-
48
, and unplug the
SAD-11B
or
SAD-18B
from the AC line outlet.
WARNING
Do not reverse-connect the battery terminals.
Do not parallel-connect the battery terminals.
Do not change batteries in hazardous locations.
To reduce the risk of explosion, recharge the batteries outside of
hazardous locations.
CAUTION
The
CD-48
cradle is NOT designed to be waterproof. Do not attempt to
charge in water hazardous locations.
NOTE
The
CD-48
cradle is only designed for the charging of the
HX380
’s battery,
and is not suitable for other purposes. The
CD-48
may contribute noise to
TV and radio reception in the immediate vicinity, so we do not recommend
its use adjacent to such device.
SAD-11B
or
SAD-18B
CD-48
Содержание HX380
Страница 1: ...HX380 VHF FM Marine Transceiver Owner s Manual ...
Страница 11: ...Page 11 HX380 MEMO ...