Standard Horizon GX2400GPS, Руководство пользователя

Страница: 47 / 148

45
10.3 GPS LOGGER OPERATION
The GX2400 includes a logger for position information that allows you to record
your location at regular intervals.
1. Press one of the soft keys.
2. Press the [◄] or [►] key repeatedly, then press the
[ LOGGER ] soft key to turn the function on or off.
The recording starts and the display returns to the
previous screen with the “ ” icon on the top of the
display.
• You may change the log interval time of recording
via the SETUP menu ( Refer to section “ 19.10.4
Logger Interval ” ).
NOTE : To utilize the records, connect the GX2400
to a PC and download the log data from the radio by
using the PC Programming Software. Refer to section
“ 22 CONNECTING A USB DATA TERMINAL TO THE PC ”.
Logger operation alert :
• When the memory for log data becomes full, three beeps will sound and a
warning message will be displayed. Afterwards the logger does not operate
until the log data in the memory are erased.
• When the logger cannot record for some reason, three beeps will sound
and a warning message will be displayed. Afterwards the logger does not
operate anymore.
• An error message will be displayed when the radio cannot erase the log data
in the memory during the operation following the alert of memory full (see
above) or in the SETUP menu (Refer to section “
19.10.5 Log Erase
” ).