Standard Horizon GX2400GPS, Руководство пользователя

Страница: 108 / 148

106
17 CHANNEL FUNCTION SETUP
17.1 CHANNEL GROUP
This menu item allows you to selection of a channel group from USA, Canada*,
and International. Refer to section “ 9.7 CHANNEL GROUP ” for details.
17.2 WEATHER ALERT (USA version only)
Enables/disables the NOAA Weather Alert function. The default setting is “ON”.
1.
Press & hold [
]

“
CHANNEL SETUP
”

“
WX ALERT
”
2. Rotate the DIAL/ENT knob to select “ ON ” or “ OFF ”.
3. Press the [ ENTER ] soft key to store the selected setting.
4. Press the [ CLEAR ] key to return to radio operation.
17.3 SCAN MEMORY
To be able to scan channels the scan memory must be programmed. This
section designates channels to be stored into scan memory.
Refer to section “ 9.10.2 Programming Scan Memory ” for details.
17.4 SCAN TYPE
This selection is used to select the scan mode between “ MEMORY ” and
“ PRIORITY ”. The default setting is “PRIORITY”.
Refer to section “ 9.10.1 Selecting Scan Type ” for details.
17.5 SCAN RESUME
This selection is used to set the time after a transmission ends before the radio
starts to scan channels again. The default setting is 3 seconds.
1.
Press & hold [
]

“ CHANNEL SETUP ”

“ SCAN RESUME ”
2. Rotate the DIAL/ENT knob to select the desired
resume time, default is 3 seconds. The resume time
can be set to “ 1sec ” through “ 5sec ”.
3. Press the [ ENTER ] soft key to store the new setting.
4. Press the [ CLEAR ] key to return to radio operation.
17.6 MULTI WATCH
This selection is used to select the watch type between “ DUAL ” and “ TRIPLE ”.
The default setting is “DUAL”.
Refer to section “ 9.9 MULTI WATCH (TO PRIORITY CHANNEL) ” for details.