Read instructions carefully prior to assembly.
Thank you for purchasing this quality product. Check carefully for small parts which may come loose during shipment. Remove all components from
pack and place top down on soft surface such as carpet or cloth to prevent scratching the finish. Identify and count all parts as specified below.
It is recommended to use two or more person during the assembly process.
STANDARD
f u r n i t ure
Cleaning instructions: Clean using soft cloth
Made in Vietnam
ASSEMBLY INSTRUCTIONS
GROUP NO.: 11620 AUBURN HONEY DR
ITEM NO.: 11631 - COUNTER HEIGHT TRESTLE TABLE
HARDWARE LIST:
PART LIST:
No. Description
Sketch
Qty'
Size
No.
Description
Sketch
Qty'
1
Short Bolt
Ø 516'' x 60mm
8 pcs
2
Long Bolt
Ø 14'' x 75 mm
4 pcs
3
Lock Washer
Ø 516'' x 13mm
12 pcs
4
Big Flat Washer
Ø 516'' x 19mm
8 pcs
5
Small Flat Washer
Ø 14'' x 12 mm
4 pcs
6
Allen Key
1 pc
4 mm
7
Industrial
Hex Bolt
4 pcs
Ø 12'' x 105 mm
8
9
Flat Washer
4 pcs
Ø 12'' x 23 mm
10 Wrench
1 pc
19 mm
sticker stick on the leg
L
sticker stick on the leg
R
A
Table Top
1 pc
B
Left Front Leg
(or Right Back Leg)
2 pcs
C
Right Front Leg
(or Left Back Leg)
2 pcs
D
Side Stretcher
2 pcs
E
Bottom Shelf
1 pc
1 3 4
6
B
C
C
B
B
A
Step 1: Place the Table Top (A) upside down on a piece of cloth or
carpet. Attach the Left Front Leg (or Right Back Leg) (B) and Right
Front Leg (or Left Back Leg) (C) to the Apron of the Table Top (A)
by inserting Short Bolt (1), Lock Washer (3), Big Flat Washer (4) and
tighten with Allen Key (6). Do not fully tighten.
Step 2: Attach the Side Stretcher (D) to the Table Legs (C);(B) by
inserting the Industrial Hex Bolt (7); Flat Washer (8); Industrial Hex
Nut (9) as the picture shown and tighten with Wrench (10) provided .
Do not fully tighten.
B
B
C
C
D
D
A
Step 1
Step 2
Step 3
2
3
5
6
D
E
C
B
C
D
B
A
E
Step 3: Attach the Bottom Shelf (E) to the Side Stretcher (D) by inserting Long Bolt (2), Lock Washer (3), Small Flat Washer (5). Fully tighten
all Bolts and Nuts in Step 1;2;3 at this time by using Allen Key (6) and Wrench (10) provided. Do not over tigten .
Turn the Table to upright position (
*Note:
It is recommended to use two or more persons to turn the Table
). Assembly product is now
completed.
Finish
7
D
C
10
8 9
Industrial
Hex Nut
4 pcs
Ø 12'' x 19 mm
