Stamina Strength Performance Series, Руководство пользователя

Страница: 9 / 18

ASSEMBLY INSTRUCTIONS
9
STEP 9
Slide a
HOLLOW CAP(21)
and
FOAM PAD(18)
onto the
PAD TUBE(9)
and bolt a
SECURING CAP
(20)
into the end of
PAD TUBE(9).
Insert the other end of the
PAD TUBE(9)
through the hole on the
MAIN FRAME(1).
Slide another
HOLLOW CAP(21)
and
FOAM PAD(18)
over the protruding end of
the
PAD TUBE(9)
and bolt a
SECURING CAP(20)
into the end of
PAD TUBE(9).
STEP 10
Rotate the
ADJUSTMENT KNOB(16)
counter clockwise until the knob portion can be pulled. Pull the
ADJUSTMENT KNOB(16)
and insert the
FOAM SUPPORT(8)
onto the
MAIN FRAME(7).
Lock the
FOAM SUPPORT(8)
in position with the
ADJUSTMENT KNOB(16).
Rotate the
ADJUSTMENT
KNOB(18)
clockwise to lock the
FOAM SUPPORT(8)
securely.
NOTE:
STEP 11
Slide a
HOLLOW CAP(21)
and
FOAM PAD(18)
onto the
FOAM SUPPORT(8)
and secure by bolting
a
SECURING CAP(20)
into the end of the
FOAM SUPPORT(8).
Repeat on other side.
There are three adjustment holes in the
MAIN FRAME(1).
These adjustment holes allow users
to adjust the height of the
FOAM PADS(18).