ASSEMBLY INSTRUCTIONS
STEP 1:
Turn the
JUVO BOARD
upside down.
BUTTON HEAD BOLTS(M8x1.25x35mm)(13),
WASHERS(M8)(26),
and
BUTTON HEAD BOLTS(M8x1.25x18mm)(15)
are pre-assembled on the
JUVO BOARD.
Remove them before the assembly.
STEP 2:
Refer to detail view 1. Position the
FRONT SUPPORT(2)
into the
FRONT ROCKING
BASE(3)
with the holes in the
FRONT SUPPORT(2)
on the same side as the
LOCKING KNOB(20).
Cover the
SUPPORT PLATE(25)
with the
FRONT ROCKING BASE(3),
then slide the assembly into
the gap between the
MAIN FRAME(1)
and
BOARD(5).
Align the holes on all of the parts, bolt the
FRONT ROCKING BASE(3)
and the
SUPPORT PLATE(25)
to the
MAIN FRAME(1)
and
BOARD(5)
with
BUTTON HEAD BOLTS(M8x1.25x35mm)(13),
WASHERS(M8)(26),
and
BUTTON HEAD
BOLTS(M8x1.25x18mm)(15).
STEP 3:
Screw the
LOCKING KNOB(20)
into
FRONT ROCKING BASE(3)
and making sure the pin
catches in one of the holes of the
FRONT SUPPORT(2).
Secure the
FRONT SUPPORT(2)
more by
screwing the
SECURING KNOB(21)
into
FRONT ROCKING BASE(3)
and tighten.
7
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at [email protected], or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
2
5
13
15
2
3
21
20
25
5
26
1
3
15
13
21
20
25
26
1.
The holes on the same
side as the Locking Knob(20).
Содержание 75-0005A
Страница 16: ...NOTES 16...
Страница 17: ...NOTES 17...
