98
99
100
77
76
25
23
2
92
35
13
13
ASSEMBLY INSTRUCTIONS
9
STEP 3
NOTE:
The
RIGHT PEDAL(100)
has an
R
stamped on the end of the pedal shaft. The
RIGHT PEDAL
(100)
has right hand threads and is tightened by turning clockwise. The
LEFT PEDAL(35)
has
an
L
stamped on the end of the pedal shaft. The
LEFT PEDAL(35)
has left hand threads and is
tightened by turning counterclockwise.
Thread the
RIGHT PEDAL(100)
into the
RIGHT CRANK(98)
as shown. Tighten the pedal securely. The
shoulder of the
PEDALS(35, 100)
should be in contact with the
CRANKS(80, 98)
when securely tightened.
Select the
RIGHT PEDAL STRAP(99)
which has
R
marked on it. Snap the three hole end to the inside
edge of the
RIGHT PEDAL(100).
Insert the other end of the strap through the slot and snap the strap to
the hook on the outside edge of the
RIGHT PEDAL(100).
Select adjustment holes which allow your foot to
be easily removed from the pedals. Use the same procedure to attach the
LEFT PEDAL(35)
to the
LEFT
CRANK(80)
and to attach the
LEFT PEDAL STRAP(92)
to the
LEFT PEDAL(35).
STEP 4
Slide the
UPRIGHT COVER(23)
on the
UPRIGHT(2)
as shown in the illustration below. Connect the
EXTENSION CONTROL CABLE(76)
to the
CONTROL CABLE(77).
Insert the
UPRIGHT(2)
onto the
MAIN FRAME(25)
and secure with
BUTTON HEAD BOLTS w/ WASHERS(M8x1.25x16mm)(13).
Slide
the
UPRIGHT COVER(23)
down to cover the bolts.
Shoulder
Shoulder
Содержание 15-5345
Страница 2: ......