ATV/UTV Trailer Ramp Instruction Manual
ASSEMBLY:
Fit the plate to top end of the ramp using 4 x bolt(M8), split washer and nut(M8). Ensuring the plate is
attached to the underside of the ramp.
Tighten nuts and bolts securely before use.
Fit a steel cover with two screw and nuts (M4), insert plastic handle into steel cover.
Then put steel cover on the other side of plastic handle, tight steel cover with two screw and nuts(M4).
INCLUDES
:
2 Ramps
2 Plates
8 Sets M8x20 bolts, M8 nuts, Flat
Washers and Split Washers
8 Sets M4x12 bolts and M4 Nuts
4pcs metal buckle of handle
2pcs plastic handle
