STALCO S-97155, Руководство пользователя

Страница: 21 / 24

Switching On/Off
To switch on the machine, press the on/off switch 8 . To lock on, press the on/off
switch 8 and lock by pressing the locking button 7 .
To switch off , release the on/off switch 8 . When locked, rst press the on/off switch
8 and then release.
Setting the Speed
By increasing or decreasing the pressure on the on/off switch 8 , the speed of the
switched-on machine can be continuously regulated.
Reduced speed of the machine facilitates the starting of holes (e.g., on smooth
surfaces such as tiles), pre¬vents the slipping of the drill and the splintering of the
drilled hole.
Recommended Speed Ranges:
- High speed for hammer drilling in concrete or stone as well as for chiseling
- Medium speed for drilling in steel and wood
- Low speed for driving screws and cutting threads.
Working Instructions
Chiseling
The SDS-plus tool can be turned in the tool holder to various positions to achieve an
optimum and low-fa- tigue working position.
Turn the operating mode selection switch 10 to position (Vario-Lock). Then turn
the tool in the tool holder to the desired position.
For chiseling, turn the operating mode selection switch 10 to position .
This locks the tool.
MAINTENANCE
Our power tools are constantly being Improved and modied to Incorporate the latest
technological advancements.
Accordingly, some parts (I.e. code numbers and/ or design) may be changed without
prior notice.
NOTE
Due to our’s continuing program of reserch and development, the specications herein
are subject to change without prior notice.8
PL
EN
21
ORIGINAL INSTR
UCTION