STALCO S-97155, Руководство пользователя

Страница: 20 / 24

Putting into Operation
Always use the correct supply voltage!
The voltage of the power source must agree with the value given on the nameplate of
the machine. Machines designated for 230 V can also be operated with 220 V.
Set the Operating Mode
With the operating mode selector switch 10, select the operating mode of the
machine.
Change the operating mode only when the ma¬chine is switched off! Otherwise, the
machine can be damaged.
To change the operating mode, press the locking button 9 and turn the
oqeratinqmode selector switch 10 to the desired position until it can be heard
to latch.
For hammer drilling
concrete and stone
For drilling in steel or
wood, for driving
screws and cutting
threads
For adjusting the
chiseling position
(Vario-Lock)
For chiseling
Setting the Direction of Rotation
With the right/left rotation switch 6 , the rotational di-rection of the machine can be
changed.
Change the direction of rotation only when the machine is switched off! Otherwise, the
machine can be damaged.
Right rotation: Turn the right/left rotation switch 6 on
both sides to the stop in the position
Left rotation: Turn the right/left rotation switch 6 on
both sides to the stop in the position
Set the direction of rotation for hammer drilling and chiseling always for right rotation.
20
PL
EN
ORIGINAL INSTR
UCTION