STALCO S-97155, Руководство пользователя

Страница: 17 / 24

ź
Always remove the plug from the power supply socket before carrying out any work
on the machinę when insterrupting work and when not using the machine.
ź
Insert the pług into the power socker only when machine is switched off
ź
Always place the cable away from the machine the rear
ź
Do not carry the machine by the cable.
Wear protective gloves and sturdy footwear.
ź
Do not carry the machinę without auxiliary handle 13.
ź
Always hold the machine wish both hands during operation and make sure you
have a rm stance.
ź
Always switch aff machine before laying aside.
ź
Persons under the age of 16 must not operate the machine without supervision.
ź
Only use original the company accessories
Safety clutch
The safety clutch is activated if the drill becomes jammed or caught. This prevents the
machinę from being wrenched from the operator's hand.
Dust extraction
Dust extraclian prevents large accumulations of dusi,high concentrations of dust in the
surrounding air and facilitates disposat.
The machinę can be plugged directly into the socket of the company all-purpose
vacuum cleaner with a remote-control start device. It starts automatically when the
machinę ist switched on.
Attach vacuum attachment(accessory)and conned the vacuum cleaner hose. The
vacuum ahachment springs forward as far as the presel drilling deplh. As a result, the
vacuum attachment head always remains close to the surface.
Auxiliary handle / Drilling depth stop
A The machine must not 6e used without nauxiliary handle 13 and must always
be held with both hands.
loosen handle by rotatlng counter- clockwise Rotate auxlllary handle 13 and
adjust the worklng poslllon. The handle mustthen be re-tlghtened.The drilling
deplh stop 12 enables the drilling depth to ben set.
Care and maintenance
Always dlsconnect the pług from the power socket before carrylng out any work on the
machine.
Themachine Ismalntenance-free.
Clean the coollng vents regularly.
Always keep the tool mount clean.
If failure occurs despite careful productlon and rlgorous quallty assurance, the
machine must be repalred by an authorlsed service workshop for the company
electrlcal fools.
Replacing dust cap
It Is Important to replace a damaged dust cap immedlately sińce the ingress of dust into
the tool mount can lead to malfunction,puli hack locking sleeve 5 and puli off dust
cap 4 diagonally.
Guarantee
We guarantee Ihecompany appliances in accordance with stalutoly regulations for
materiał and manufacturing faults
PL
EN
17
ORIGINAL INSTR
UCTION