Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • [email protected]
DocID: 525570_525571_30.11.2021
GP-10 BAT Bk / GP-10 BAT Wh
EN
Infrared remote control
GP 10
%
ö
$
#
'
&
(
ö
[ON/OFF]
Turns the device on or off
#
[+]
Increases the brightness of the LEDs in 5 steps
$
[–]
Decreases the brightness of the LEDs in 5 steps
%
[Blackout]
Switches the LEDs on or off
&
[Fade]
Enables or disables the fade effect
'
[Strobe]
Enables or disables the strobe effect
(
[20%]... [100%]
Buttons for directly selecting the brightness of the LEDs
Mounting
When in use, the device must always be attached to a solid surface or an
approved truss. Always work from a stable platform whenever installing, moving
or servicing the device. In doing so, the area underneath the unit must be
cordoned off.
1. You can attach the device to metal surfaces with the magnetic base.
To do this, remove the mounting clip.
2. Alternatively, attach the M10 mount of the mounting clip to a stand or a suitable
truss.
Always use a safety cable for mounting the device over your head!
Exchanging the gobos
10 gobos are included in the scope of delivery.
1. Turn the device off with the main switch and wait until it has cooled down
completely.
2. Unscrew the knob of the gobo holder and pull out the gobo holder.
3. Remove the lock ring from the gobo holder. Now you can remove the gobo and
replace it with another.
Place the gobo so that the subject appears mirror-inverted, when you look at the
optics from the front.
4. Put the lock ring back on the gobo holder.
5. Replace the gobo holder and screw the knob of the gobo holder firmly.
Technical specifications
Light source
10-W LED in cold white
Light source properties
Colour temperature
10 000 K
Colour rendering index CRI 70
Optical properties
Beam angle
16°...31°
Gobo
Diameter
25.8 mm
Control
Infrared remote control
Input connections
Socket for connecting the supplied power
adapter
Power consumption
10 W
Power supply
External power adapter, 100 - 240 V ~ 50/60 Hz
Operating voltage
8.4 V 1 A
Battery
Battery type
Lithium-ion
Voltage
8.4 V
Capacity
5000 mAh
Charging time in the device 4 h
Battery remote control
Lithium-ion button cell CR2025
Degree of protection
IP20
Mounting options
Hanging, standing
Colour
Black (item no. 525570), white (item no. 525571)
Dimensions (W × H × D)
110 mm × 170 mm × 167 mm
Weight
1 kg
Ambient conditions
Temperature range
0 °C...40 °C
Relative humidity
20 %...80%
(non-condensing)
For the transport and protective packaging, environmentally friendly materials have been
chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are
properly disposed of. Do not just dispose of these materials with your normal household was-
te, but make sure that they are collected for recycling. Please follow the notes and markings on
the packaging.
Batteries must not be disposed of as domestic waste or thrown into fire. Dispose of batteries
according to national or local regulations regarding hazardous waste. Dispose of empty batte-
ries at appropriate collection sites. Dispose lithium batteries only in discharged condition.
Remove replaceable lithium batteries from the device before disposal. Protect used lithium
batteries from short circuits, for example by covering the poles with adhesive tape. Perma-
nently installed lithium batteries must be disposed of together with the device. Please inquire
about a suitable acceptance point.
This product is subject to the European Waste Electrical and Electronic Equipment Directive
(WEEE) in its currently valid version. Do not dispose of your old device with your normal house-
hold waste. Dispose of this product through an approved waste disposal firm or through your
local waste facility. Comply with the rules and regulations that apply in your country. If in
doubt, consult your local waste disposal facility.
