Technical description
4
Maximum permissible deviation of the set value
from the absolute value at cut-out is ± 4 %.
MANOSKOP
®
721 Quick and 730 Quick comply
with DIN EN ISO 6789, Type II, Class A.
Each MANOSKOP
®
has a serial number and is
delivered with a works calibration certificate in
accordance with the above stated
DIN EN ISO 6789.
Standard MANOSKOP
®
721/5 Quick,
721/15 Quick, 721/20 Quick and
721QR/20 Quick ...
... have a permanent, switchable ratchet with a
permanent square drive (sizes are shown in the
Technical Specifications). Controlled counter
clockwise tightening is not possible.
Standard MANOSKOP
®
721/30 Quick
...
... has a permanent, switchable ratchet with a push-
through 12,5 (1/2'') square drive.
Service MANOSKOP
®
730/5 to
730/65 Quick ...
... can be fitted with various insert tools. For this
purpose, the head of the wrench has a recessed
square drive at the face (sizes are shown in the
Technical Specifications) with a double-sided
locating hole and insertion groove. The insert tools
can be attached in the „normal“ position or rotated
through 180°. Controlled counter clockwise
tightening is also possible.
Technical Data
MANOSKOP
®
721 Quick
721/5
721/15
721/20
721QR/20
721/30
range
[N‧m]
[ft‧lb]
6–50
5–36
30–150
25–110
40–200
30–150
40–200
30–150
60–300
50–220
square drive shaft
fixed [mm]
usable from both sides [mm]
10 (3/8“)
–
12,5 (1/2“)
–
12,5 (1/2“)
–
12,5 (1/2“)
–
–
12,5 (1/2“)
Length 1) [mm]
338
415
483
483
530
functional length L
F
[mm]
293
387
418
418
486
weight [g]
915
1310
1490
1250
1710
1) length to centre of square drive
