Stahl IDM160, Руководство по эксплуатации

Страница: 29 / 36

Operating Instructions Scanner IDM Operation

R. STAHL HMI Systems GmbH / OI_Scanner_IDM_en_V_01_00_04.docx / 29.01.2016 Page 29 of 36
11.3.2 Base loading station
Only the IDM160-BT-BaseBT-Z1 explosion-protected base loading
station may be used in hazardous areas.
This is the only station with which the wireless scanner can be re-
loaded in a hazardous area.
For loading the explosion-protected wireless scanner in non-
hazardous areas two different base loading stations are available
(see type keys).
For loading or parking the wireless scanner, insert the lower part of the handle into the loading
station to ensure that the contacts for loading are connected properly.
The LED at the head of the scanner will come on to indicate loading.
The non-Ex base loading stations require a power supply, which is connected to the loading
station.
This connection is closed ex-factory in base loading stations for
hazardous areas.
WARNING
NOTICE
NOTICE
Power supply
connection
WARNING