Stahl IBPC-5x1, Руководство по эксплуатации

Страница: 12 / 24

Operating Instructions Industrial Box PC Installing the device
Page 12 of 24

R. STAHL HMI Systems GmbH / OI_Industrial_Box_PC_en_V_01_00_00.docx / 26.09.2018
8.1 Vertical operation

Attach the feet only at the positions shown in the illustrations.

Detach the cables, if necessary.

Place the device on its top (narrow side) as shown on a stable, plane and clean surface.

Hook the feet into the intended openings in the enclosure (1).

The feet have lock symbols indicating the direction in which to slide the foot when
mounting / dismounting it.
-
attach and lock foot into position = slide to the left (closed lock)
- unlock and detach foot = slide to right (open lock)

Repeat for each foot:
- Use both hands to press the outer elements of the foot evenly onto the enclosure
and slide the foot in the direction of the arrow (2) until it clicks into position.

To prevent inadvertent detachment of the feet they can also be secured with two type
M2.5 x 5 screws. These are not included in the delivery.

Fix the feet into position with the screws (3).

Position the device on the feet.

Re-connect any disconnected cables.