Stahl EC-940-DUA Series, Инструкция по эксплуатации

Страница: 63 / 606

Instruc
tion manual - English - EN
61 MNTCMPXT_1824_EN
Continue by pressing the Install button.
You carry out this procedure once and only once for
each PC that is to have access to the device in the
network.
The Live Video window will then appear. To activate
the parameters, click on Quit, which is found next to
the Video Display.
Fig. 117
The general parameter setting menu will then appear.
Fig. 118
9.7.2.1 Configure the software parameters
Keep the account and the password in a
secure place.
• WAN Setting: Choose the static IP address, which
allows you to access the unit to be configured. E.g.,
assign static IP address 192.168.0.101. Press Apply
to confirm, save and restart (Save Reboot menu).
Wait 30 seconds before reconnecting to the new
address (e.g. 192.168.0.101). Enter Account and
Password (default account and password if they
have not been modified).
Fig. 119