Stahl 8527/2, Руководство по эксплуатации

Страница: 29 / 52

8527602300
S-BA-8527/2-01-en-10/10/2007
General Safety Information
3 Circuit breakers for motor protection
8527/2
3 General Safety Information
3.1 Safety Instructions for Assembly and Operating Personnel
The operating instructions contain basic safety instructions which are to be observed
during installation, operation and maintenance. Non-observance will endanger persons,
plant and the environment.
Before assembly/commissioning:
X
Read through the operating instructions.
X
Give adequate training to the assembly and operating personnel.
X
Ensure that the contents of the operating instructions are fully understood by
the personnel in charge.
X
The national installation and assembly regulations (e.g. IEC/EN 60079-14) apply.
If you have questions:
X
Contact the manufacturer.
When operating the device:
X
Ensure the operating instructions are made available on location at all times.
X
Observe safety instructions.
X
Observe national safety and accident prevention regulations.
X
Only run the device according to its performance data.
X
Servicing/maintenance work or repairs which are not described in the operating
instructions must not be performed without prior agreement with the manufacturer.
X
Any damage may render explosion protection null and void.
X
No changes to the device impairing their explosion protection are
permitted.
X
Install and use the device only if it is undamaged, dry and clean.
3.2 Warnings
Warnings are sub-divided in these operating instructions according to the following
scheme:
They are always identified by the signalling word “WARNING“ and sometimes also have
a symbol which is specific to the danger involved.
WARNING
Risk due to unauthorised work being performed on the device!
Z
Risk of injury and damage to equipment.
X
Mounting, installation, commissioning and servicing work must only be performed by
personnel who are both authorised and suitably trained for this purpose.
WARNING
Type and source of the danger!
Z
Possible consequences.
X
Measures for avoiding the danger.