Stahl 8180/03, Руководство по эксплуатации

Страница: 11 / 14

Mounting
4
140348 / 8180602300
2013-09-05·BA00·III·en·03
Connection terminal
8180/03
7 Mounting
During installation, the middle clamping bit of terminal 8180/03-185/1 serves as a tension reliever of the cable inserted below.
Connection example using single terminal 8180/03-185/1:
Base material Polyester resin
Ambient temperature - 50 °C ... + 100 °C
Tightening torque M 8: 10 Nm
Suitable wire material Copper
Rated working voltage 750 V
Rated current Rated cross-section Temperature class
Entry Exit
up to 394 A up to 240 mm
2
up to 240 mm
2
T6
up to 500 A up to 2 x 150 mm
2
up to 2 x 150 mm
2
T6
up to 2 x 185 mm
2
up to 2 x 185 mm
2
up to 2 x 240 mm
2
up to 2 x 240 mm
2
up to 2 x 240 mm
2
laminated, Cu flat-band
11 x (21 x 1) mm
2
up to 630 A up to 2 x 185 mm
2
up to 2 x 185 mm
2
T5
up to 2 x 240 mm
2
up to 2 x 240 mm
2
up to 2 x 240 mm
2
laminated, Cu flat-band
11 x (21 x 1) mm
2
WARNING
Please consult with the manufacturer before operating under conditions which deviate
from the standard operating conditions.
WARNING
The connecting terminal has to be mounted in an enclosure that meets the requirements
of an approved type of protection as specified in EN 60079-0.
When installing the connecting terminal in an enclosure designed to Increased Safety
„e“ type of protection the clearance and creepage distances must be maintained.
Dimension drawings (all dimensions in mm) - subject to alterations
04462E00 04461E00
8180/03-185/2 Single terminal 8180/03-182/3 Single terminal