Stahl 6148 Series, Руководство по эксплуатации

Страница: 24 / 28

Maintenance, Overhaul, Repair
24
206676 / 614860300010
2019-10-10·BA00·III·en·05
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Portable Lamp
Series 6148
10 Maintenance, Overhaul, Repair
10.1 Maintenance
• Consult the relevant national regulations to determine the type and extent of
inspections.
• Adapt inspection intervals to the operating conditions.
• Perform maintenance and repair work in accordance with IEC 60079-17 and
IEC 60079-19.
At a minimum, check the following points during maintenance work on the device:
• Whether the clamping screws holding the electrical lines are fitted securely
• Whether the device enclosure and/or protective enclosure has/have cracks or other
visible signs of damage
• Compliance with the permissible temperatures (according to EN 60079)
• Whether the device is used as intended and functions properly
CAUTION
Risk of electric shock or malfunction of the device due to unauthorized work!
Non-compliance can result in light injuries!
• Before carrying out work on the device, switch off voltage supply.
• Work performed on the device must only be carried out by authorized
and appropriately trained qualified electricians.
CAUTION
Danger of electric shock due to energised parts!
Non-compliance can result in minor injuries!
• All connections must be disconnected from the power supply.
• Secure the connections against unauthorized switching.
Observe the relevant national regulations in the country of use.