manualshive.com logo in svg

Stahl 282303, Руководство по эксплуатации

Поделиться
Скачать
Stahl 282303 Скачать руководство пользователя страница 17

282892 / 652560300080

2020-12-10·BA00·III·en·01

Mounting and installation  

17

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN

Floodlight LED

Series 6525/2

7.2

Mounting / dismounting, operating position

• Maximum tightening torque of 10 Nm for connection screw of the mounting bracket 

and floodlight.

• Pendant mounting with ring eyes (M6).

DANGER

Explosion hazard due to inadmissible heating!

Non-compliance results in severe or fatal injuries.

• Avoid external heat sources and/or direct sunlight  

(risk of change of temperature class or change of maximum permissible 

surface temperature).

• Do not exceed the maximum ambient temperature due to external heat 

sources (premature failure of equipment).

CAUTION

Risk of damage to the eyes caused by optical radiation!

Non-compliance can result in light injuries!

• A minimum distance of 7.751 m between the luminaire and the eye of 

the viewer must be maintained for the version with narrow-beam light 

distribution.

The luminaire is suitable for wall, ceiling mounting and pole mounting with a 

mounting bracket.

Do not install the luminaire so that light is emitted upward and/or so that the 

cable entry is pointing upward.

Содержание 282303






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды