Stahl 130665, Руководство по эксплуатации, Страница: 18 / 32

Technical data
4 8040606300
S-BA-8040-en-02-15/06/2007
Control and signal station
8040
6 Technical data
Version Type 8040
Explosion protection
Gas explosion protection
E
II 2 G Ex edqm ia/ib [ia/ib] II, IIA, IIB, IIC, T6, T5 or T4
Gas explosion protection
(IECEx) Ex de ia/ib [ia/ib] m II, IIA, IIB, IIC, T6, T5 or T4
Dust explosion protection
E
II 2 D Ex tD A21 IP 65 T 80 °C, T 95 °C, T 130 °C
Dust explosion protection
(IECEx) Ex tD A21 IP65 T 80 °C, T 95 °C
Certificates
Gas explosion protection PTB 01 ATEX 1105
Dust explosion protection PTB 01 ATEX 1105
IECEx certification IECEx PTB 06.0025
Rated working voltage max. 690 V, AC
Rated working current depends on components used
Operating temperature range - 20 °C ... + 40 °C
- 50 °C ... + 60 °C on request
Cable entries
Max. Cross-section for
connection
2.5 mm
2
Terminal tightening torque max. 1.2 Nm
Flanges In standard design the enclosures are without flanges;
On request they can be fitted with flanges on sides C and D.
Flanges are available in: polyester resin or in brass, powder-coated, dark grey similar to
RAL 7024
Degree of protection IP 66
Material
Housing Polyester resin (glass fibre-reinforced)
Gaskets PU foam
Cover fixing M 4, cheese head screws, imprescriptible, stainless steel
WARNING
X
With ambient temperatures < -20 °C, cable entries „suitable for low temperatures“
must be used, or the station must be so positioned that the cable entries are
mechanically protected.
X
The electrical data is affected by the devices fitted. Please refer to the individual type
and rating plates.
)
If cable glands other than those manufactured by Fa. R. STAHL Schaltgeräte
GmbH are used, then their degree of protection should be noted.
Standard: 1 x M 25 x 1.5; cable gland 8161; side below (D);
directly mounted into enclosure wall
Special: in side C (top) and/or side D (below); 1 x M 20 x 1.5; 1 x M 25 x 1.5;
metal cable glands are possible; mounting of metal cable glands in metal flange or via
metal adapter plate