Stahl 130665, Руководство по эксплуатации, Страница: 17 / 32

8040606300
S-BA-8040-en-02-15/06/2007
Safety instructions
3 Control and signal station
8040
3 Safety instructions
Use the station only for its intended purpose.
Incorrect or impermissible use or non-compliance with these instructions invalidates our
warranty provision.
No changes to the station impairing its explosion protection are permitted.
Mount the station only if it is clean and undamaged.
Observe the following when using the station:
X
National safety regulations
X
National accident prevention regulations
X
National installation regulations (e.g. IEC 60079-14)
X
Generally recognized technical regulations
X
Safety guidelines in these operating instructions
X
Characteristic values and rated operating conditions on the rating and data plates
X
Additional instruction plates on the station
Any damage can invalidate the Ex-protection.
4 Conformity to standards
The station complies with the following standards and regulations:
X
Directive 94/9/EC
X
EN 60079-0, EN 60079-7, EN 61241-0, EN 61241-1
X
IEC 60079-0, IEC 60079-1, IEC 60079-11, IEC 60079-18, IEC 60079-7, IEC 61241-0,
IEC 61241-1
Type 8040 station is suitable for use in hazardous areas, zones 1, 2 and 21, 22.
5 Function
Type 8040 control and signal stations are explosion-protected equipments for local
mounting. They are used for control and switching functions in hazardous areas.