manualshive.com logo in svg

Staheli West DewPoint 6210 2015, Руководство пользователя, Страница: 57 / 280

Поделиться
Скачать
Staheli West DewPoint 6210 2015 Скачать руководство пользователя страница 57

©  2022 Staheli West

57

Tes

ts

Tes

ts

Main

tenance

Main

tenance

Tr

oubleshooting

Tr

oubleshooting

Technic

al 

In

forma

tion

Technic

al 

In

forma

tion

Oper

ation

Oper

ation

Pr

e-Oper

ation

Requir

emen

ts

Pr

e-Oper

ation

Requir

emen

ts

Sa

fe

ty
Sa

fe

ty

How to Start Steaming

1

3

5

2

4

6

The operator then has to agree with the Owner/

Operator Agreement before he can move on to the 

Field Work screen.

The machine will prepare for field work.

This will take 5-30 minutes depending on how full the 

boiler is, and the starting temperature of the water.

The steam purge valve will open.

You have arrived at the Field Work screen!

Turn on the machine by flipping the red rocker 

switch.

Press Start All.

Press Confirm Start (The machine needs to have water 

and fuel before you can start steaming).

Press Continue.

Содержание DewPoint 6210 2015

























































































































































































































































































Отзывы:

Нет отзывов