REAR PANEL
1. VOLUME 1: Controls the volume of the auxiliary input 2 and the Bluetooth
®
wireless technology signal.
2. AUX input: 3.5 mm mini stereo jack.
3. Bluetooth
®
wireless technology on/off switch: When this switch is on, the speaker can be connected to
a smartphone. To do so, access the Bluetooth
®
wireless technology in your phone settings, search the
speaker among the available devices and connect both units.
4. Bluetooth
®
wireless technology LED: This LED is off when the Bluetooth
®
wireless technology is switched off.
It blinks when the speaker is searching for a connection. It is on when the connection is established.
5. MIC VOLUME: Controls the volume of the microphone inputs 6 and 7.
6. XLR input: Balanced microphone input.
7. 1/4-inch balanced phone jack input: Can be used to connect a low impedance microphone or high
impedance sources such as guitars or keyboards, balanced or unbalanced.
8. LINE VOLUME: Volume of line inputs 9 and 10.
9. Phono stereo input: Can be used to connect an external audio device such as a CD player.
10. XLR input: Balanced line input.
11. MASTER VOLUME: Controls the speaker volume
12. TREBLE: Controls the amount of high frequencies in the output signal (-12 dB to + 12 dB).
13. BASS: Controls the amount of low frequencies in the output signal (-12 dB to + 12 dB).
14. LINE OUT 1/4-inch balanced phone jack: 1/4-inch balanced phone jack Line out that can be used to
connect an amplifi er or another powered speaker in series.
15. LINE OUT XLR: Balanced XLR output that can be used to connect an amplifi er or another powered speaker
in series. Wiring of the 3-pin connector: Pin 1 = Shield - Pin 2 = Positive (hot) - Pin 3 = Negative (cold)
16. CLIP LED: LED warning indicator. This LED turns on when the input signal reaches distortion.
Reduce the input level in order to reduce the distortion.
17. VOLTAGE SELECTOR: This amplifi er can manually be adapted to the mains voltage 110-120V 60Hz
or 220-250V 50Hz. Remove the transparent cover to access to the switch and put it back to prevent
accidental switching.
18. AC CONNECTOR AND FUSE HOLDER: Always remove the power cord before changing the fuse.
19. POWER switch: This switch turns on/off the power.
20. POWER indicator LED: This LED turns on when unit is receiving mains power.
3
4
2
6
7
9
14
10
15
1
5
8
11
12
13
16 20
17
18
19
This is a user manual for the DIGITAL Powered Speaker. It contains important safety information as well
as the instructions required for the intended use of the device. Please read it carefully before use.
Please note that the design and the technical specifi cations of the device are subject to change without
any prior notice. Check the website for updates.
SAFETY INSTRUCTIONS
• Thank you for purchasing this product. It has been thoroughly tested and has been shipped in perfect
operating condition.
• Before using the product, carefully check the packaging for damage. If the packaging is damaged,
carefully inspect the device, the power cable and the plugs and make sure they are intact. If they are
damaged, please contact your vendor or call our customer support number. The whole cable should be
replaced if it is damaged or if the plug is damaged. Do not repair or modify the mains power cable.
Do not open the cabinet. Leave all servicing to qualifi ed personnel.
• In order to work safely and properly, this active speaker must be connected to a mains (AC) outlet
and earthed.
• Attention before connecting your amplifi er to a mains AC outlet! This amplifi er can be powered by
110-120V AC 60Hz or 220-250V AC 50Hz. A selector on the rear permits to switch to your local voltage.
• Only use the device in a dry location. Do not operate the device if the ambient temperature or humidity
is too high.
• Do not spill or splash liquids on the amplifi er. Should this happen, unplug the power cable from the
mains outlet and switch off the powered speaker immediately.
220-240
110-
120
!
AC VOLTAGE
turn plate if not correct and
change value of fuse
220-240
110-
120
• Read the instructions printed on the rear panel of the cabinet.
• Make sure that the cabinet is placed or installed in such a way that it cannot injure anyone.
• Do not place heat sources on the speaker cabinet, such as lighting equipment or smoke machines.
• Do not attempt to clean the plastic enclosure with solvents or petrochemical-based cleaners.
WARNING
Exposure to sounds that are louder than 85 dB can cause permanent hearing loss.
Please use this amplifi ed speaker responsibly for you and your neighborhood.
CONFORMITY
1. The CE mark on this product means that the device conforms to the EMC Directive (2004/108/CE),
CE marking Directive (93/68/EEC) and Low Voltage Directive (2006/95/EC).
2. The crossed-out wheeled bin symbol means that the product must be collected separately for recycling,
as stipulated in the WEEE (Waste Electric and Electronic Equipment) Directive (2002/96/EC).
3. The RoHS mark means that the device conforms to the Restriction of Hazardous Substances Directive
(2002/95EC) which restricts the use of certain hazardous substances in electrical and electronic equipment,
such as mercury, lead, cadmium, hexavalent chromium, polybrominated buphenyl (PBB)
and polybrominated diphenyl ethers (PBDE).
